specifcations subject to change without notice. please check our website for latest information. 0805 power inductors document st265-1 revised 03/04/11 l 2 dcr 4 srf 5 part 10% q min 3 max typ isat 6 irms 7 number 1 (h) at 1 mhz (ohms) (mhz) (a) (a) ST336PHA102KLZ 1.0 21 0.14 340 0.90 1.6 st336pha152klz 1.5 21 0.18 265 0.85 1.3 st336pha272klz 2.7 21 0.35 190 0.60 0.88 st336pha332klz 3.3 21 0.50 180 0.55 0.70 st336pha392klz 3.9 21 0.74 165 0.50 0.61 st336pha472klz 4.7 21 0.85 155 0.43 0.59 st336pha562klz 5.6 21 0.91 143 0.38 0.57 st336pha682klz 6.8 21 1.37 118 0.32 0.46 st336pha103klz 10 21 1.51 66 0.27 0.43 st336pha153klz 15 21 2.04 34 0.22 0.34 st336pha223klz 22 25 2.48 22 0.18 0.33 st336pha333klz 33 25 3.00 17 0.16 0.28 st336pha473klz 47 25 3.85 15 0.15 0.26 st336pha683klz 68 28 4.42 12 0.12 0.24 st336pha823klz 82 30 6.00 12 0.11 0.21 st336pha104klz 100 32 6.96 9.0 0.10 0.19 st336pha124klz 120 32 7.51 7.7 0.10 0.18 st336pha154klz 150 32 8.33 5.0 0.08 0.18 st336pha224klz 220 32 13.71 5.0 0.07 0.14 st336pha334klz 330 32 20.53 3.5 0.06 0.11 1. when ordering, please specify termination and testing codes: st336pha334klz termination: l = rohs compliant silver-palladium-platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). testing: z = cots h = screening per coilcraft cp-sa-10001 2. inductance measured at 100 khz, 0.1 vrms, using a coilcraft smd - a fxture in agilent/hp 4263b lcr meter. 3. q measured on an agilent/hp 4291 with an agilent/hp 16193 test fxture. 4. dcr measured on a micro-ohmmeter and a coilcraft ccf840 test fxture. 5. srf measured using an agilent/hp 8753d network analyzer and a coilcraft smd-d test fxture. 6. dc current at which the inductance drops 10% (typ) from its value without current. 7. current that causes a 40c temperature rise from 25c ambient. 8. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. power inductor for critical applications st336pha shielded power inductors excellent current handling for a part this size; low dcr core material ceramic/ferrite terminations silver-palladium-platinum-glass frit. other termina - tions available at additional cost. weight 57.6 C 62.4 mg ambient temperature C40c to +65c with i rms current, +65c to +105c with derated current storage temperature component: C55c to +105c. packaging: C55c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles temperature coeffcient of inductance (tcl) +100 to +250 ppm/c moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) packaging 1500/7 reel; 7500/13 reel plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth 1102 silv er lak e road car y il 60013 phone fa x 800-981-0363 847-639-1508 e-mail we b cps@coilcraft.com www .coilcraft-cps .com ? ? coilcraft, inc. 2011
specifcations subject to change without notice. please check our website for latest information. 0805 power inductors document st265-2 revised 03/04/11 power inductor for critical applications C st336pha 0.1 1 10 100 1 000 11 0 100 1000 current (ma) inductance (h) 10 h 3.3 h 330 h 100 h 1 h a b c max max max d e f g h i j 0.133 0.118 0.079 0.053 0.080 0.050 0.020 0.070 0.040 0.030 inches 3,38 3,00 2,00 1,35 2,03 1,27 0,51 1,78 1,02 0,76 mm typical l vs frequency typical l vs current 0.1 1 10 100 1 000 0.01 0.1 11 0 frequency (mhz) inductance (h) 10 h 3.3 h 330 h 100 h 1 h 0.1 11 0 frequency (mhz) q factor 10 h 3.3 h 330 h 1 h 100 h 70 60 50 40 30 20 10 0 typical q vs frequency note: height dimension is before optional solder application. for maxi - mum height including solder, add 0.006 in / 0,15 mm. a b f d c e g i i j h recommended land p attern te r minal wraparound: appro x 0.010/0,25 both ends suggested land pattern irms derating -40 -20 02 04 06 08 0 100 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 pe r cent of rated rms i 25c 1102 silv er lak e road car y il 60013 phone fa x 800-981-0363 847-639-1508 e-mail we b cps@coilcraft.com www .coilcraft-cps .com ? ? coilcraft, inc. 2011
|
